| Dart Home | PowerTCP FTP for .NET | Custom Development | Reply | PowerTCP FTP for .NET Topics | Forums |
| Author | Forum: PowerTCP FTP for .NET Topic: Upload hangs on large file ... behind firewall |
| junkMan From: Boston, NE USA Posts: 2 Member Since: 04/02/06 |
posted April 3, 2006 9:44 AM Hi, I try to upload 2 files of 50 MB using a C# console program (using PowerTCP FTP Component 2.3.2.0) on Windows Server 2003. The transfer always complete but it hangs after the first file and the following error is thrown : "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond" When I disable the local (client) firewall it works well. The real problem is that I can't disable the firewall. It sounds like my program never receive the "226 Transfer Complete" when the firewall is active. I tried using passive mode and active mode and it's always the same problem. I am a bit lost and would like to know if someone can help me. Thank you! PS: I have absolutely no control over the server configuration. |
| junkMan From: Boston, NE USA Posts: 2 Member Since: 04/02/06 |
posted April 3, 2006 9:50 AM When uploading smaller files it always work even if the firewall is enabled. |
| Raj From: Rome, NY, USA Posts: 389 Member Since: 02/01/06 |
posted April 4, 2006 10:26 AM Hi, A similar issue was discussed in the following post: http://support.dart.com/postings?topicid=5409 You might have to handle the error and proceed accordingly, since the transfer is completed successfully. -Raj |
| Reply | PowerTCP FTP for .NET Topics | Forums |
This site is powered by
PowerTCP WebServer for ActiveX
|