Login  
Search All Forums
Dart Home | PowerTCP Server for ActiveX | Custom Development Reply | PowerTCP Server for ActiveX Topics | Forums   
AuthorForum: PowerTCP Server for ActiveX
Topic: VB.NET AxDartServer error
Filiok

From: asdasd, AZ US Virgin Islands
Posts: 6
Member Since: 03/14/06
posted March 15, 2006 3:20 PM

Hi Tony Priest,
as you asked i made a seperate thread. I followed your instructions and added DartServer to the general tab, but i cant add it to the form because it gives me an "Dll not registered error". I thought i really isnt registered and did that with regsvr32, but it still gives me the error. I tried installing the fix you gave me but that didnt work either. What should i do now?
Tony Priest



From: Utica, NY USA
Posts: 8466
Member Since: 04/11/00
posted March 15, 2006 3:59 PM

You probably did not run the correct hotfix. Make sure that you run the correct version for your framework. If it asks to reboot, make sure you do. In fact reboot anyway.

Also, did you register DartSock.dll as well? If not please do so and try again.
Filiok

From: asdasd, AZ US Virgin Islands
Posts: 6
Member Since: 03/14/06
posted March 16, 2006 8:21 AM

Well i installed the fix for 1.1 for all OS exept server 2003, and registered dartsock, but im still getting this error :( Do i really need the AxServer? Cant i just replace it with the simple Dart Server?
Tony Priest



From: Utica, NY USA
Posts: 8466
Member Since: 04/11/00
posted March 16, 2006 8:54 AM

I'm not sure I totally understand your problem, so let's back up a bit. Please try this:

1) Install the PowerTCP Server Tool on your machine
2) Start a brand new windows form project
3) Add the "Dart Server Control" to the toolbar
4) Drag a server control onto the form

If you get an error, please post the exact message that you get.
Filiok

From: asdasd, AZ US Virgin Islands
Posts: 6
Member Since: 03/14/06
posted March 16, 2006 10:26 AM

My VS isnt in english so i cant post the exact error message, but im absolutley sure its the "dll not registered" error in english
Tony Priest



From: Utica, NY USA
Posts: 8466
Member Since: 04/11/00
posted March 16, 2006 10:34 AM

So are you saying you followed all the steps in my last post? Can't you get someone to translate the message? I really need to know the exact message.

Filiok

From: asdasd, AZ US Virgin Islands
Posts: 6
Member Since: 03/14/06
posted March 16, 2006 11:05 AM

Look, i know english very well, and im telling you that when i drop the control on the form i get "dll not registered". Thats the exact translation
Tony Priest



From: Utica, NY USA
Posts: 8466
Member Since: 04/11/00
posted March 16, 2006 11:11 AM

My apologies. It's just that I have tried very hard to duplicate the error you are seeing without success. If you have followed all of my steps and are still getting an error, than I don't have any other advice. Please let me know if that is the case and I will have someone contact you regarding advanced support options.
Filiok

From: asdasd, AZ US Virgin Islands
Posts: 6
Member Since: 03/14/06
posted March 16, 2006 12:45 PM

Well thanks for your help, since this isnt working, ill try to translate the code to delphi. Its much easier with dll work though, and the Ax component is not needed. Ill ask if i need any help =]
Reply | PowerTCP Server for ActiveX Topics | Forums   
This site is powered by PowerTCP WebServer Tool PowerTCP WebServer for ActiveX