| Dart Home | PowerTCP Emulation for ActiveX | Custom Development | Reply | PowerTCP Emulation / Telnet for ActiveX Topics | Forums |
| Author | Forum: PowerTCP Emulation / Telnet for ActiveX Topic: Running PowerTCP |
| johyson From: Bangalore, India Posts: 7 Member Since: 11/13/03 |
posted November 14, 2003 4:50 AM Hi, I went through the code for project emulator in PowerTCP toolkit. Since i dont have the actual emulator right now, i was trying to connect to Microsoft telnet window. I got the error #10054. When i connect to the same machine on which tool is installed, i get the same error. Please help thanks, johyson |
Tony Priest From: Utica, NY USA Posts: 8466 Member Since: 04/11/00 |
posted November 14, 2003 8:56 AM That means there is no Telnet server running on the machine. |
| johyson From: Bangalore, India Posts: 7 Member Since: 11/13/03 |
posted November 14, 2003 8:58 AM Hi, The Telnet service is running on the machine. Also i have opened the telnet window using the "telnet" command from DOS in Win 2000 machine. |
| Tony Priest From: Utica, NY USA Posts: 8466 Member Since: 04/11/00 |
posted November 14, 2003 9:03 AM Actually that error looks like the server accepted the connection, then immediately closed it. Is the server available for me to try and connect to? |
| johyson From: Bangalore, India Posts: 7 Member Since: 11/13/03 |
posted November 14, 2003 9:06 AM Hi, I am really sorry to tell that i cannot allow anyone to connect to the server as it is a company intranet. I am not permitted to allow this. Can you please suggest anything else? Any other Win 2000 tool with which i can try PowerTCP tool? As i dont have the actual emulator at present and that i cannot get it unless i am sure on this screen scraping tool, i want to test it against anything possible thanks, johyson. |
| Tony Priest From: Utica, NY USA Posts: 8466 Member Since: 04/11/00 |
posted November 14, 2003 9:24 AM I don't have any public Telnet servers to give you. If the service is running on your machine you should be able to connect to it. Are you sure that you used an unmodified version of the sample? |
| johyson From: Bangalore, India Posts: 7 Member Since: 11/13/03 |
posted November 16, 2003 11:15 PM Hi, Ya, i did not modify the sample. I have one humble request. Since I am in India and you are in US reply to each mail is taking 24 hr time. As i need a quick evaluation of the tool can we arrange a chat session. I will await a reply to this mail before 9:30 AM your time. thanks, johyson. |
| Tony Priest From: Utica, NY USA Posts: 8466 Member Since: 04/11/00 |
posted November 17, 2003 9:00 AM Unfortunately a chat session would not be possible. Our support department can be reached by telephone at 315-790-5456 if you would like to discuss support options. |
| ali ali.a@galnet.dk From: cph, USA Posts: 13 Member Since: 11/06/03 |
posted November 19, 2003 9:19 AM umm i donno whats causing this either but try giving it a specific port telnet port daytime e.t.c or try this : To open the Telnet Server Admin utility, click Start, click Run, type tlntadmn.exe, and then click OK. If you cannot open the Telnet Server Admin utility, you may need to install the Admin Tools pack. You must be logged on as a member of the Administrators group to use the Telnet Server Admin utility. You must stop and restart Telnet Server for these changes to take effect. make sure the settings are correct after that try ummm i dont know if its legal try it at your own risk telnet services from red hat or cisco they had these for there customers but i donno if they still have them as cli is something that most users avoid ! |
| Reply | PowerTCP Emulation / Telnet for ActiveX Topics | Forums |
This site is powered by
PowerTCP WebServer for ActiveX
|